Have you ever ever discovered your self a wonderfully good dresser, however wishing it was only a bit taller? Possibly you are a tall one who wants extra hanging area, or perhaps you simply wish to create the phantasm of a taller ceiling in your room. Regardless of the motive, there are a couple of easy methods to make a dresser taller with out having to purchase a brand new one.
One of many best methods to make a dresser taller is so as to add legs to the underside. Yow will discover legs at most {hardware} shops, and so they are available a wide range of shapes and sizes. If you happen to’re undecided what measurement legs to get, measure the peak of your dresser after which add 2 or 3 inches. This will provide you with sufficient top to make a noticeable distinction, however not a lot that the dresser seems awkward.
Another choice for making a dresser taller is so as to add a riser to the highest. A riser is a bit of wooden or different materials that sits on prime of the dresser and provides top. Risers can be found in a wide range of sizes and types, so yow will discover one which matches the look of your dresser. If you happen to’re useful, you may even make your individual riser out of wooden or MDF.
Elevate the Dresser with Legs
Give your dresser a top enhance by including legs. That is an efficient answer if you have to elevate the dresser considerably. This is elevate your dresser with legs:
Supplies You will Want:
| Merchandise | Amount |
|---|---|
| Dresser | 1 |
| Furnishings legs | 4-6, relying on the dresser’s measurement |
| Screws or bolts | As per the leg design |
| Screwdriver or wrench | 1 |
| Stage (non-compulsory) | 1 |
Steps:
- Flip the dresser the wrong way up and place it on a cushioned floor to stop scratches.
- Decide the specified leg placement and mark the screw holes accordingly. Use a stage to make sure the marks are stage.
- Connect the legs to the dresser utilizing screws or bolts. Tighten the {hardware} securely.
- Flip the dresser proper facet up and place it in its desired location.
- Verify the steadiness of the legs by making use of stress to every leg. If essential, regulate the screws or bolts till all legs are firmly connected.
Add a Riser Platform
This technique is a little more everlasting than the earlier ones, nevertheless it’s additionally the simplest. You will must buy a riser platform, which is actually a field that sits below your dresser. Riser platforms are available a wide range of sizes and heights, so you may select one which’s the proper match in your wants.
To put in a riser platform, merely place it below your dresser after which carry the dresser onto it. Make sure to safe the dresser to the platform utilizing bolts or screws to stop it from tipping over.
Listed here are a number of the advantages of utilizing a riser platform to make your dresser taller:
| Profit | Description |
|---|---|
| Provides vital top | Riser platforms can add a number of inches and even ft of top to your dresser, making it rather more seen and accessible. |
| Offers extra storage | Some riser platforms include built-in drawers or cabinets, which may present additional space for storing in your belongings. |
| Improves stability | By elevating your dresser off the bottom, a riser platform might help to enhance its stability and stop it from tipping over. |
Create a Pedestal Base
Including a pedestal base to your dresser is a basic solution to elevate its top. This is an in depth information to making a sturdy and classy pedestal:
Supplies:
- 1×4 pine boards
- 1×6 pine boards
- Wooden glue
- Screws
- Clamps
- Miter noticed
- Drill
- Measuring tape
Directions:
1. Reduce the Base Body
Reduce 4 1×4 pine boards to the specified width of your pedestal base. Assemble them right into a sq. or rectangle utilizing wooden glue and screws. Make sure the corners are sq. and the body is stage.
2. Create the Stiles and Rails
Reduce 4 1×4 pine boards to the peak you need your pedestal to be, plus 2 inches for the highest and backside rails. Reduce 4 extra 1×6 pine boards to the identical size as the bottom body, minus 2 inches for the facet stiles.
3. Assemble the Pedestal
Connect the stiles to the within corners of the bottom body utilizing wooden glue and screws. Then, connect the rails to the highest and backside of the stiles, once more utilizing wooden glue and screws. Reinforce every joint with clamps to make sure a robust bond. Fill any gaps with wooden filler and permit the glue to dry fully.
Dimensions:
| Dimension | Measurement |
|---|---|
| Dresser Width | To match dresser |
| Dresser Top | To match dresser + 2 inches |
| Stile Top | Desired pedestal top + 2 inches |
| Rail Size | Dresser width minus 2 inches |
Make the most of Stackable Bins
Stackable bins are a flexible and reasonably priced answer for including top to a dresser. They arrive in numerous sizes and supplies, permitting you to customise storage based on your wants. Select bins that match contained in the dresser drawers for optimum area utilization, or go for taller bins that may be positioned on prime of the dresser itself, extending its top.
Selecting Stackable Bins
Think about the next elements when deciding on stackable bins:
- Dimension: Make sure the bins match comfortably contained in the dresser drawers or are the suitable top for putting on prime.
- Materials: Select sturdy supplies like plastic, material, or steel to resist common use.
- Fashion: Choose bins that complement the dresser’s design or create a visually interesting distinction.
Ideas for Utilizing Stackable Bins
- Maximize area: Use completely different bin sizes to fill drawers effectively and decrease wasted area.
- Arrange successfully: Categorize gadgets into particular bins, comparable to garments, equipment, or paperwork, for straightforward retrieval.
- Create visible enchantment: Make the most of ornamental bins or line them with material to reinforce the dresser’s aesthetics.
| Bin Kind | Top |
|---|---|
| Small Drawer Bin | 3-5 inches |
| Massive Drawer Bin | 6-8 inches |
| Tall Prime-of-Dresser Bin | 10-12 inches |
Connect Wall-Mounted Cabinets
Including wall-mounted cabinets above your dresser is an effective way to create extra space for storing and add top to the piece. Think about these steps when putting in wall-mounted cabinets:
1. Decide the Top and Placement
Determine on the specified top of the cabinets and mark their placement on the wall utilizing a stage. Make sure the cabinets are aligned with the dresser to create a cohesive look.
2. Set up Shelf Brackets
Use a drill to create pilot holes for the shelf brackets. Set up the brackets into the wall studs for max help.
3. Connect the Cabinets
Place the cabinets onto the brackets and safe them with screws. Modify the peak of the cabinets as wanted to make sure they’re stage.
4. Fashion the Cabinets
Adorn the cabinets with books, crops, or different ornamental gadgets to enhance the dresser and add visible curiosity.
5. Set up Crown Molding or Trim
Think about including crown molding or trim to the highest of the cabinets to offer them a completed and cohesive look. It will assist to visually join the cabinets to the dresser, creating the phantasm of a taller piece.
By following these steps, you may simply add wall-mounted cabinets to your dresser, creating extra space for storing and enhancing the general type and performance of the piece.
Incorporate Drawers into the Top
1. Assess Drawer Capability
Decide the quantity and measurement of drawers required to accommodate your saved gadgets successfully. Think about each vertical and horizontal area utilization inside the dresser.
2. Select Drawers with Stackable Design
Go for drawers that may be stacked on prime of one another, creating extra top with out compromising performance. Stackable drawers present a seamless and uniform look.
3. Incorporate Drawers into Base
Think about including drawers to the bottom of the dresser. This enables for max top utilization by making use of the area beneath the present base.
4. Use Drawer Risers
Drawer risers are platforms that may be positioned below drawers to extend their top. Out there in numerous supplies and sizes, risers present an adjustable answer to customise the general top of the dresser.
5. Make the most of Vertical Drawer Dividers
Set up vertical dividers inside drawers to create a number of compartments. These dividers not solely arrange gadgets but in addition add structural help, permitting drawers to be stacked increased with out compromising stability.
6. Designate Particular Objective Drawers
Allocate drawers for particular gadgets, comparable to socks, scarves, or jewellery. This enables for extra environment friendly group and prevents drawers from changing into cluttered and troublesome to navigate. Think about creating deep drawers for voluminous gadgets and shallow drawers for smaller equipment.
Drawer Storage Optimization Desk
| Merchandise Kind | Drawer Depth |
|---|---|
| Clothes | Medium to Massive |
| Equipment | Shallow to Medium |
| Sneakers | Massive |
Set up a Mirrored Prime
A mirrored prime can add top to a dresser and make it seem extra substantial. Listed here are the steps on set up a mirrored prime:
- Measure the highest of the dresser and reduce a bit of mirror to suit.
- Apply a bead of clear silicone caulk across the fringe of the mirror.
- Fastidiously place the mirror on prime of the dresser, aligning it with the perimeters.
- Press down on the mirror to safe it in place.
- Wipe away any extra caulk with a moist material.
- Permit the caulk to dry fully earlier than utilizing the dresser.
- As soon as the caulk is dry, you may add ornamental trim or molding across the edges of the mirror, if desired.
Supplies:
| Merchandise | Amount |
|---|---|
| Mirror | 1 |
| Clear silicone caulk | 1 tube |
| Caulk gun | 1 |
| Damp material | 1 |
| Ornamental trim or molding (non-compulsory) | 1 |
Instruments:
| Device | Amount |
|---|---|
| Measuring tape | 1 |
| Glass cutter | 1 |
| Security glasses | 1 |
| Caulk gun | 1 |
Construct a Customized Extension
If you’d like a extra everlasting answer, you may construct a customized extension so as to add top to your dresser. It is a extra concerned venture, nevertheless it will provide you with probably the most flexibility when it comes to design and measurement.
To construct a customized extension, you have to:
- Wooden (plywood or stable wooden)
- Wooden glue
- Nails or screws
- Sandpaper
- Paint or stain (non-compulsory)
After getting gathered your supplies, observe these steps:
- Measure the peak of your dresser and the specified top of the extension.
- Reduce the wooden to the specified top and width.
- Connect the wooden to the highest of the dresser utilizing wooden glue and nails or screws.
- Sand the extension to clean the perimeters.
- Paint or stain the extension to match the dresser.
Listed here are some extra suggestions for constructing a customized extension:
- In case you are utilizing plywood, you should definitely use a high-quality plywood that’s a minimum of 3/4 inch thick.
- Use wooden glue and nails or screws to connect the extension to the dresser. It will guarantee a robust and sturdy bond.
- Sand the extension to clean the perimeters and take away any splinters.
- Paint or stain the extension to match the dresser. It will give the extension a completed look.
| Device | Objective |
|---|---|
| Wooden glue | Bond the wooden collectively |
| Nails or screws | Connect the wooden to the dresser |
| Sandpaper | Clean the perimeters of the wooden |
| Paint or stain | Give the extension a completed look |
Make the most of a Bookcase as a Header
Integrating a bookcase on prime of your dresser is a intelligent solution to prolong its top. Choose a bookcase with a depth that aligns along with your dresser’s floor. Safe it firmly to the dresser utilizing brackets or screws. The extra shelf area not solely provides top but in addition supplies sensible storage for books, décor, or private belongings.
Further Ideas for Utilizing a Bookcase as a Header
- Go for a bookcase with an open design to keep away from cluttering the visible area.
- Think about portray the bookcase to match the dresser, making a cohesive look.
- If the bookcase has a number of cabinets, make the most of the decrease cabinets for heavier gadgets to make sure stability.
- Decorate the bookcase cabinets with crops, paintings, or ornamental gadgets to reinforce its aesthetic enchantment.
- Be sure that the bookcase is securely connected to the dresser to stop any accidents.
Top Extension: Roughly 1-2 ft, relying on the bookcase’s top.
Supplies Required:
- Use mild colours on the areas that you just wish to seem taller.
- Use darkish colours on the areas that you just wish to seem shorter.
- Use stripes to create the phantasm of top.
- Use paint to focus on the legs of the dresser.
- Use a high-gloss paint to mirror mild and make the dresser seem taller.
- Use a matte paint to soak up mild and make the dresser seem shorter.
| Merchandise | Amount |
|---|---|
| Bookcase | 1 |
| Brackets or Screws | As required |
Paint Illusions to Create Taller Look
Portray stripes on the dresser can create the phantasm of top. Paint vertical stripes in a light-weight colour on the perimeters of the dresser and horizontal stripes in a darker colour on the highest and backside. It will make the dresser seem taller and narrower.
One other manner to make use of paint to create the phantasm of top is to color the legs of the dresser in a light-weight colour and the remainder of the dresser in a darker colour. It will make the legs seem longer and the dresser seem taller.
Listed here are some extra suggestions for portray illusions to create a taller look:
| Paint Shade | Impact |
|---|---|
| Gentle | Makes the world seem taller |
| Darkish | Makes the world seem shorter |
| Stripes | Creates the phantasm of top |
How one can Make a Dresser Taller
In case your dresser is simply too quick in your wants, there are some things you are able to do to make it taller. One choice is so as to add casters or legs to the underside of the dresser. It will increase the peak of the dresser by a number of inches, making it extra handy to make use of. Another choice is to construct a platform or base for the dresser to take a seat on. This will even increase the peak of the dresser, and it could additionally present extra space for storing.
In case you are including casters or legs to the underside of the dresser, you should definitely select ones which are sturdy sufficient to help the burden of the dresser and its contents. You must also be sure that the casters or legs are connected securely to the dresser.
In case you are constructing a platform or base for the dresser, you should definitely use sturdy supplies that may help the burden of the dresser. You must also be sure that the platform or base is stage and secure.
