5 Ways To Reboot Into Another Device On Windows Cmd

5 Ways To Reboot Into Another Device On Windows Cmd

by

5 Ways To Reboot Into Another Device On Windows Cmd

For those who’re a Home windows consumer, you could have come throughout the necessity to reboot your machine into one other one. This may be helpful for troubleshooting functions or if you wish to entry a special working system. On this article, we will present you the way to reboot into one other machine on Home windows Cmd.

First, you will have to open a Command Immediate window. To do that, press the Home windows key + R, kind “cmd” into the Run dialog field, after which click on OK. As soon as the Command Immediate window is open, you will have to kind the next command: “shutdown /r /o”. This command will reboot your machine into the Home windows Boot Supervisor, which is able to assist you to select which machine you need to boot from.

When you’re within the Home windows Boot Supervisor, you should utilize the arrow keys to pick the machine you need to boot from. As soon as you have chosen the machine, press Enter and your machine will reboot into that machine. Notice that in case you’re booting from a USB drive or a DVD, you might want to alter the boot order in your BIOS settings.

Accessing Superior Boot Choices

To entry superior boot choices in Home windows utilizing the command immediate (cmd):

  1. Press Home windows key + R to open the Run dialog.
  2. Sort cmd and press Enter to open the command immediate.
  3. Sort the next command and press Enter: 
    bcdedit /set {default} bootmenupolicy legacy
  4. Restart your pc.

When your pc restarts, you need to see the Superior Boot Choices menu. This menu lets you select which machine in addition from, in addition to different superior boot choices.

In addition from a special machine, use the arrow keys to navigate to the specified machine and press Enter. Your pc will then boot from the chosen machine.

To revive the default boot choices, open the command immediate once more and kind the next command and press Enter:

bcdedit /set {default} bootmenupolicy commonplace

Restart your pc and the default boot choices shall be restored.

Utilizing Command Immediate to Reboot

Here is the way to reboot utilizing Command Immediate:

1. Open Command Immediate (CMD) with administrator privileges.
2. Enter the next command:

“`
shutdown /r /t 0
“`

This command reboots the pc instantly (0 seconds). You may alter the time (in seconds) after which the reboot happens by altering the worth of "/t". For instance, the command "shutdown /r /t 300" would reboot the pc after 300 seconds (5 minutes).

3. Press Enter to execute the command.
4. The pc will start the reboot course of.

It’s also possible to use the next desk to specify extra choices with the "shutdown" command:

Choice Description
/s Shuts down the pc.
/l Logs off the present consumer.
/i Shows the graphical consumer interface (GUI) for shutdown choices.
/f Forces operating functions to shut with out warning.
/t Specifies the time (in seconds) after which the shutdown or reboot happens.

Coming into the Path to the Different System

Figuring out System Path

To reboot into one other machine, you could first decide its path. The machine path specifies the placement of the machine in your system. To search out the machine path, open the System Supervisor and find the machine you need to reboot into. Proper-click the machine and choose “Properties.” Within the “Common” tab, you can see the machine path listed beneath “System occasion path.”

Checking for Compatibility

Earlier than getting into the machine path into the command line, you need to affirm that your present machine is suitable with the brand new machine. To do that, open a command immediate and kind the next command:

““
bcdedit /enum firmware
““

This command will show a listing of all of the firmware gadgets put in in your system. Discover the machine you need to reboot into and examine the “Description” column. If the outline incorporates the phrase “UEFI Suitable,” then your present machine is suitable with the brand new machine.

Coming into the System Path within the Command Line

Upon getting verified the compatibility of your gadgets, you’ll be able to enter the machine path into the command line. To do that, open a command immediate and kind the next command:

““
bcdedit /set {default} machine partition=x:
““

Change “x” with the letter of the partition that incorporates the working system you need to boot into. For instance, if you wish to boot into the working system situated on the C: drive, you’d kind the next command:

““
bcdedit /set {default} machine partition=C:
““

After getting into the command, press Enter. Your pc will then reboot into the opposite machine.

Restarting the System

To reboot the system from the Command Immediate, use the next command:

Command Description
shutdown -r Reboots the system instantly with out warning.
shutdown -r -t [seconds] Reboots the system after a specified variety of seconds.

E.g., shutdown -r -t 30 reboots the system 30 seconds after the command is executed.
shutdown -r -f Reboots the system instantly, overriding any open applications or unsaved adjustments.
This feature could result in knowledge loss. Use with warning.

These instructions will be modified to customise the reboot course of additional.

**Further choices:**

  • -m **<pc identify>: Reboots the desired distant pc.
  • -c "remark": Provides a remark to the shutdown occasion log.
  • -o: Shuts down the system and boots to the firmware settings (BIOS or UEFI).
  • -l: Logs off the present consumer and reboots the system.
  • -a: Aborts a pending system shutdown or restart.

Understanding Restart Paths

Home windows offers a number of restart paths to facilitate system restoration and diagnostics. Listed here are the generally used restart paths:

1. Reboot: Restarts the system usually, reloading the working system and functions.

2. Restoration: Enters the Home windows Restoration Surroundings (WinRE), a specialised diagnostic and restore mode.

3. Exit and Proceed: Exits the present boot course of and continues with the earlier boot try (if relevant).

4. Reset: Resets the system to its manufacturing unit default settings, reinstalling the working system and deleting all knowledge.

5. UEFI Firmware Settings: Permits entry to the system’s UEFI firmware settings, offering low-level {hardware} configuration capabilities:

Entry Technique System Producer
F2 Dell, HP, Lenovo, Toshiba
F10 Acer, Asus, MSI, Samsung
F12 Compaq, Gateway, IBM
DEL Common Electrical, Intel
ESC Hewlett-Packard

These restart paths enable for numerous troubleshooting and restoration eventualities, from easy system restarts to complicated {hardware} diagnostics.

Troubleshooting Boot Points

For those who encounter boot points after rebooting into one other machine, attempt the next troubleshooting steps:

1. Verify BIOS Settings

Be sure that the BIOS is configured in addition from the specified machine. Entry the BIOS settings by urgent a particular key throughout system startup (sometimes F2, F10, or Del).

2. Reset CMOS

If incorrect BIOS settings forestall booting, reset the CMOS to default values. Search for a jumper or button on the motherboard labeled “CMOS reset” or “CLR CMOS.”

3. Run System Diagnostics

Some motherboards have built-in diagnostics that may troubleshoot {hardware} points. Entry the diagnostics utility from the BIOS settings or by urgent a particular key throughout startup.

4. Attempt a Minimal Boot

Boot the system with solely important {hardware} (e.g., one reminiscence module, built-in graphics) to eradicate potential conflicts with peripherals.

5. Verify Boot Order

Be sure that the boot order within the BIOS is appropriate. The specified machine ought to be listed as the primary boot possibility.

6. Superior Troubleshooting:

If the above steps fail, attempt the next superior troubleshooting strategies:

6.1. Restore Startup utilizing BCDEdit

Use the BCDEdit command-line device to restore the boot configuration knowledge. Open an elevated Command Immediate and enter the next instructions:

6.2. Rebuild the BCD

If repairing the BCD fails, rebuild it utilizing the next instructions:

bootrec /FixMbr
bootrec /FixBoot
bootrec /ScanOs
bootrec /RebuildBcd

6.3. Restore the System Picture

If all else fails, take into account restoring the system picture from a backup to revert to a earlier working state.

Managing A number of Gadgets

Home windows Command Immediate (Cmd) presents a robust device for managing a number of gadgets related to your pc. This part delves deeper into the instructions and strategies you should utilize to reboot and work together with these gadgets from the Cmd interface.

Rebooting Distant Gadgets

To reboot a distant machine utilizing Cmd, you’ll be able to make the most of the “shutdown” command. Here is the syntax:

shutdown /m device_name

Change “device_name” with the identify or IP tackle of the machine you need to reboot.

Checking System Standing

Use the “netstat -an” command to view a listing of all energetic community connections. This command shows details about the distant gadgets related to your pc, together with their IP addresses and port numbers.

Configuring System Settings

To configure machine settings via Cmd, use the “devcon” command. This command lets you modify machine properties, equivalent to energy administration settings, driver updates, and useful resource allocation.

Disconnecting Distant Gadgets

To disconnect a distant machine out of your pc, use the “internet use” command. Here is the syntax:

internet use device_name /delete

Change “device_name” with the identify or IP tackle of the machine you need to disconnect.

Clearing System Historical past

To clear the historical past of related gadgets in Cmd, kind the next command:

netsh wlan present profiles

This command shows a listing of all Wi-Fi profiles saved in your pc. You may then delete particular profiles through the use of the “netsh wlan delete profile identify=” command, changing “identify” with the identify of the profile you need to take away.

Viewing System Info

Use the “systeminfo” command to retrieve detailed details about your pc, together with details about related gadgets. This command shows details about {hardware}, software program, and community configuration.

Troubleshooting System Points

For those who encounter points with gadgets related to your pc, you should utilize the “eventvwr” command to view system logs. These logs could comprise details about errors or warnings associated to the gadgets.

Customizing Boot Choices

1. Modify Boot Configuration Knowledge (BCD): Use bcdedit instructions to edit the BCD retailer, which incorporates boot configuration settings for all put in working methods.

2. Set Default Boot Entry: Run “bcdedit /default {GUID}” to set the default OS in addition into.

3. Add Boot Menu Timeout: Use “bcdedit /timeout X” to set a delay earlier than the OS auto-boots (in seconds, X).

4. Create Boot Entry for New OS: Create a brand new boot entry for a non-default OS utilizing “bcdedit /create /d “DisplayName” /software osloader.” Change “DisplayName” with the specified identify for the entry.

5. Set Bootloader Choices: Append choices to the tip of the bootloader command line utilizing “bcdedit /set {GUID} choices “choices””, the place choices can embrace “safemode”, “verbose”, or “debug.”

6. Handle Drive Letter Assignments: Use “bcdedit /set {GUID} machine partition={drive letter}:” to assign or change drive letters for partitions.

7. Disable Computerized Restore: Forestall Home windows from trying computerized repairs on boot failures utilizing “bcdedit /set {globalsettings} recoveryenabled no.”.

8. Superior Choices:

    – Disable Legacy Boot: Disable legacy BIOS firmware boot mode utilizing “bcdedit /set {globalsettings} nextsyscmd nolegacy.”.

    – Allow Hypervisor Launch Pad: Boot into Hyper-V’s Hypervisor Launch Pad utilizing “bcdedit /set {default} hypervisorlaunchtype auto.”.

    – Configure Hyper-V Safe Boot: Guarantee safe boot is configured for Hyper-V digital machines by operating “bcdedit /set {default} hvprotection on.”.

Automating System Reboots

Rebooting gadgets remotely will be tedious and time-consuming, particularly when a number of gadgets must be rebooted. To streamline this course of and save time, you’ll be able to automate machine reboots utilizing Home windows Command Immediate (Cmd).

Here is a step-by-step information on the way to automate machine reboots into one other machine on Home windows Cmd:

Step 1: Open Command Immediate

Press the Home windows key + R and kind “cmd” within the Run dialog field to open Command Immediate.

Step 2: Set up a Distant Connection

Use the command “mstsc /v:ipaddress” to hook up with the distant machine. Change “ipaddress” with the IP tackle or hostname of the goal machine.

Step 3: Elevate Permissions

Sort “runas /consumer:administrator cmd” to raise your privileges on the distant machine. Enter the administrator’s password when prompted.

Step 4: Provoke the Reboot

Execute the command “shutdown -r -t 0” to provoke a distant reboot. The “-r” flag specifies a reboot, and the “-t 0” flag units the reboot delay to 0 seconds, triggering an instantaneous reboot.

Step 5: Confirm the Reboot

To substantiate the reboot standing, you should utilize the command “qwinsta /server:ipaddress” to examine if the goal machine is offline.

Step 6: Repeat for A number of Gadgets

To automate reboots for a number of gadgets, create a batch file with the next syntax:


@echo off
set gadgets=device1,device2,device3
for /f "tokens=1" %%d in (%gadgets%) do mstsc /v:%%d | runas /consumer:administrator cmd | shutdown -r -t 0
pause

Step 7: Save and Run the Batch File

Save the batch file with a .bat extension and run it to provoke reboots on all specified gadgets.

Step 8: Configure for Unattended Execution

To run the batch file unattended, create a scheduled job with the next settings:

– Set off: Every day/weekly/month-to-month or on a particular occasion.
– Motion: Begin a program and specify the batch file path.
– Run whether or not consumer is logged on or not.

Step 9: Monitor and Troubleshoot

Monitor the reboot course of via the command immediate or by checking the machine statuses within the System Supervisor or Distant Desktop Connection Supervisor. Resolve any errors or points encountered throughout the reboot course of.

Learn how to Reboot Into One other System on Home windows Cmd

Rebooting into one other machine on Home windows Cmd is a helpful method for troubleshooting {hardware} and software program points. This technique lets you briefly swap the energetic working system to a different machine, equivalent to a USB drive or community share, with out having to bodily restart your pc.

To reboot into one other machine utilizing Home windows Cmd, comply with these steps:

1. Open the Command Immediate as an administrator.
2. Sort the next command and press Enter:
“`
bcdedit /set {bootmgr} {default} {machine}
“`
3. Change {machine} with the identifier of the machine you need to boot into. For instance, in addition from a USB drive, use:
“`
bcdedit /set {bootmgr} {default} {machine} USB
“`

4. Restart your pc.

The pc will now boot into the machine you specified.

Folks Additionally Ask

How do I discover the identifier of a tool in Home windows Cmd?

To search out the identifier of a tool in Home windows Cmd, use the next command:

“`
bcdedit /enum all
“`

The identifier shall be listed within the “Path” column.

Can I reboot right into a digital machine utilizing Home windows Cmd?

Sure, you’ll be able to reboot right into a digital machine utilizing Home windows Cmd. To take action, use the next command:

“`
bcdedit /set {bootmgr} {default} {machine} VM
“`

Change {VM} with the identifier of the digital machine you need to boot into.

Is it doable to reboot right into a community share utilizing Home windows Cmd?

Sure, it’s doable to reboot right into a community share utilizing Home windows Cmd. To take action, use the next command:

“`
bcdedit /set {bootmgr} {default} {machine} networkshare
“`

Change {community} with the IP tackle or hostname of the community share, and {share} with the identify of the share.

Command Description
bcdedit /set {default} machine partition=

Units the default boot machine to the desired partition.
bcdedit /set {default} osdevice partition=

Units the OS partition for the default boot machine.